Abuja FCT · Nationwide serviceCall 0810 040 7122

Field Notes

Borehole guides

Practical advice on planning, surveys, solar pumps, maintenance and water treatment.

How to Compare Borehole Quotes in AbujaUnderstand how depth, geology, casing and pump choice affect a quote, and what to look for in the written scope.

Borehole quotes vary with the conditions under your property and the work included in the scope. Compare the same specifications and deliverables before choosing a contractor.

Four factors that shape your quote

Depth affects rig time, fuel, rods and casing. Geology determines which drilling method is suitable. Casing and screen requirements depend on formation stability. The pump system depends on the tested yield, your water demand and the power available on site.

What to look for in a written quote

  • Survey report and recommended drilling point.
  • Drilling depth allowance, casing grade and screen specifications.
  • Pump capacity, power source and any storage or pipework included.
  • Well development, test pumping and the process for agreeing changes to scope.
Why a Geophysical Survey Before Drilling Is the Cheapest Money You'll SpendIn basement-complex country like Abuja, water hides in narrow fracture zones. A survey helps identify a suitable drilling point before the rig arrives.

A dry borehole costs the full drilling price and returns nothing. A geophysical survey costs a fraction of that and tells you where — and roughly how deep — the water actually is. In a region where productive aquifers run through narrow fracture zones in hard rock, that knowledge is the difference between one successful well and an expensive education.

What the survey actually measures

Vertical Electrical Sounding passes a small current into the ground at increasing spacings and measures how the subsurface resists it. Water-saturated and clay-rich layers conduct differently from dry rock, letting the hydrogeologist map layers, weathered zones and fracture targets before any rig mobilises.

The output you should demand is concrete: a recommended drilling point (with alternatives), an estimated depth to the target zone, and a stated confidence level. If your driller cannot explain the survey result in plain language, ask.

What a good survey report includes

  • VES profiles with interpreted layer resistivities
  • A marked-up site sketch showing tested and recommended points
  • Estimated depth to the water-bearing zone
  • An honest verdict — including 'don't drill here' when true

We survey first on every HydroDrill job — and if your land genuinely cannot support an economic borehole, we would rather tell you before you spend than after. See how surveys fit into our four-step process on the Services page.

Solar vs Generator: The Best Way to Power Your Borehole PumpDiesel is bought daily; sunlight is free. How to decide between solar, generator and grid power for a borehole in Abuja or Nasarawa.

The cheapest borehole to drill is not the cheapest to own. How you power the pump decides your cost per litre for the next decade, and in our region that arithmetic increasingly favours solar.

The running-cost reality

A generator pumping a household well for a few hours daily needs regular fuel, oil, filters and repairs. Grid power — where dependable — is cheaper, but outages leave tanks empty at the worst moments. A properly sized solar array has no fuel cost at all, pumping through daylight hours into storage.

Our rough sizing principle: design around litres per day, not pump kilowatts. Storage tanks then carry you through the night and cloudy spells.

When each option wins

  • Solar: estates, farms, schools, off-grid sites — anywhere fuel logistics or outages hurt.
  • Grid + changeover: buildings with reliable supply and modest pumping hours.
  • Generator: temporary sites, very deep high-yield wells with intermittent pumping.
  • Hybrid solar-first systems: the best of all worlds for critical facilities.

A solar borehole is engineered, not guessed: array watts matched to pump demand and local sun hours, MPPT control, dry-run protection and the right tank volume. Read about our solar borehole service or request a site assessment and we will size both options with real numbers.

5 Signs Your Borehole Needs Rehabilitation (Not Replacement)Weak flow, sandy water, air spurts, rising power bills, odd pump noise — when your old well can be saved, and when it can't.

Many 'failed' boreholes are not dead — they are clogged, silted or running on a tired pump. Rehabilitation often revives a well at a third to half the cost of drilling new. Here are the five signals we see most across Abuja and Nasarawa.

  • 1. Flow that fades — pump runs but output has dropped over months. Classic screen clogging or a falling water column.
  • 2. Sandy or muddy water — sediment breaking through a failing screen or gravel pack.
  • 3. Air spurts and spluttering — a dropping water table, partly blocked intake, or a corroded riser line.
  • 4. Rising power bills with falling water — a pump working harder against a clogged screen or worn impellers.
  • 5. Rattles, grinding or repeated breaker trips — failing bearings, a jammed impeller or a pump half-buried in silt.

The rehabilitation sequence is straightforward: diagnose (camera or bailer test where needed), airlift-flush and surge the screens, descale the casing, restore the gravel pack, then replace or repair the pump. Some wells do need replacing — collapsed casing beyond a certain depth, for instance — but you deserve to know which one yours is before spending.

Our rehabilitation service starts with diagnosis before quotation. If the well is genuinely beyond saving, we will tell you and show you why.

Rainy Season vs Dry Season: When Is the Best Time to Drill?Water tables move with the seasons. What drilling in the rains versus the dry season means for your borehole's long-term performance.

Clients often ask whether they should wait for the rains to pass before drilling. The honest answer: you can drill in either season, but you should understand what each does to the data.

Drilling in the dry season

Dry-season water tables sit at their lowest. That is exactly why experienced drillers like it: a well that yields in March will yield all year. The depths you drill to are honest depths, not flattered by seasonal recharge.

The trade-offs are scheduling (dry season is peak demand) and dust on access roads.

Drilling in the rainy season

Recharge is generous, so shallow aquifers look better than they may perform in April. A good driller corrects for this — survey interpretation and depth decisions must assume the seasonal swing, or you risk a borehole that struggles every dry season.

Practically: rigs can work in light rain; heavy rain halts work for access and safety. We monitor the forecast around every mobilisation.

Our approach: survey and drill when you need water, but set target depths and yield expectations from dry-season data. That is part of the honesty you should expect in any written scope of work.

From Ground to Glass: Keeping Your Borehole Water Safe to DrinkBorehole water is usually clean at the source — but storage, pipework and treatment decide what reaches your cup.

Deep borehole water in our region is typically microbiologically safe at the source — that is the whole advantage over shallow wells. But what happens after the water leaves the aquifer is where most quality problems are created: dirty tanks, dead rodents, cracked seals, rusting pipes.

The four habits that keep borehole water safe

  • Seal the wellhead: a proper sanitary seal keeps surface water and creatures out of the casing.
  • Clean the tanks: wash storage tanks at least twice a year; more often if water sits for weeks.
  • Test annually: a basic physico-chemical and bacterial test costs little and tells you everything.
  • Filter only what's needed: treat the actual problem (iron, turbidity, bacteria) — not whatever a vendor has in stock.

Watch for the classic local issues: iron (metallic taste, brown stains on tiles and laundry), turbidity after heavy rain (indicator of a compromised seal or screen), and any sudden change in taste or colour — always worth a test.

Our water treatment and storage service starts with a test, not a product. If your water needs nothing more than a clean tank, that is exactly what we will tell you.